LON fire sader help

Get your trial key

Live community: https://discord.gg/s39XdMV

New user ? Check guides​ or ask the discord bot

Joined: 01/17/2016 - 11:54
Sat, 02/16/2019 - 20:52 #1

running vsswinta scripts with masterprofile.
90 @ 7.5 gph
max 250b/h
85 @9.5 gph
max about 200b/h
how can i get more xp per hour?

Joined: 04/14/2018 - 16:59
Sun, 02/17/2019 - 05:08

You need to use flash rune on iron skin, movement speed boost helps a lot.
Swap law to law of valor - unstoppable force.
Prophet on akarats champion, swap addendum for BoP in cube and equip furnace. Addendum is for holy akkhan build, not for LoN fire.
Your helm has physical dmg.
You need nemesis.
The passive on your amulet is not as useful as holy cause.
This is how I set mine up, pretty similar to the one in cyps planner.
I run 94 13.5 gph.

Joined: 01/17/2016 - 11:54
Sun, 02/17/2019 - 08:38

sorry the op d3planner was the wrong one, i use that to up gems.
here's the correct one. the helm have fire damage instead of phy. 
i used wing of angel as my speed boost instead of flash rune on iron skin.
i went through 400 hf crafting. this one is the only one roll ok.
no luck with rerolling furnacce. 100-150 reroll. not one comes out ok...


Joined: 04/14/2018 - 16:59
Sun, 02/17/2019 - 09:04

And because you use wings of angels, you cannot use unstoppable force. Which leads to you wearing reapers wraps instead of nemesis.
Keep upgrading rares, you'll get a good or at least decent furnace. Pretty much any ancient furnace outperforms BoP.
I crafted about 400 amulets aswell, still not satisfied but at least it's decent.
You're free to play however you like, I added my two cents and told you how that works out for me. :)
I used akkhan holy till I collected all items required for LoN to work, you should easily be able to do that aswell, and get 12-14 gp/h with at least double xp/h
My latest 10h+ session got me 620b/h 1r2gr on tier 94.

Joined: 01/17/2016 - 11:54
Sun, 02/17/2019 - 09:27

thanks for the reply.
my akkhan set was worst than my lon set.
i will change out the skill and try that out.
i go from 19000 to 4000 DB. furnace show up about 5%, out of the 30 i got 4 anicent. none of them roll higher than 3800 with CDR....

Joined: 01/17/2016 - 11:54
Tue, 02/19/2019 - 16:44

here's the updated gears set
i got better result.
8gph gr90 about 340bph.
how can i make it better?
should i drop the gr to 85?

Joined: 10/26/2014 - 17:00
Wed, 02/20/2019 - 05:08

Change the following:

Items: equip Leorics Crown and put Reaper wraps in Cube

Skills; Change Wings of Angels to Invincible for 50% more Condemns, change Iron Skin to Flash Rune, Change Shield Glare to Justice with the 5% speed rune.

Why change this? Because you get 

1- More cooldown = overall lower condemn cost
2- More regen = more overall condemns

Your problem now is that you constantly run out of wrath, this way you miss a lot of xp.

Joined: 04/14/2018 - 16:59
Wed, 02/20/2019 - 05:57

Agree with perquin, except for the reapers wraps. I do not believe they are necessary at all. Although I do believe he means "laws of valor - unstoppable force" instead of invincible.
You should not drop gr lvl, your gear/paragon suggests that you should be more than capable of doing 90+ at this point.
Both your rings are amazing btw, love that fire res on secondary!

Joined: 01/17/2016 - 11:54
Wed, 02/20/2019 - 06:03

the link above is wrong. i forgot i change out the skill.
here's the correct version.
8gph gr90 about 340bph
i have been using flash rune for iron skin. 
lower to 85 doesnt increase gph, so exp drop
in fact anything lower than 90 will cause exp drop.
sheet dps around 5mil, i will try move up see how that goes.

do you mean unstoppable force?
yeah i do run out of wrath.
how do i gain more cooldown? since i already have leorics in the cube?
i will change it up see if i can get more.

Joined: 10/26/2014 - 17:00
Thu, 02/21/2019 - 19:09

Yes sorry, I mean the 50% wrath reduction skill. Reapers is indeed not necessary, but without it you cast so much less condemns, and in my setup that REALLY hurts Xp. Btw, I also use Krelms Belt instead of the cooldown belt.

I run season, 2xxx para and do 550b/hr with 1/2 r/gr

Joined: 01/17/2016 - 11:54
Sat, 02/23/2019 - 10:26

finally have some time to do testing, busy school week. lol
big thanks for perquin and Kiks.
especially kiks, i think you solved my issue. 
i was running rosbot on my spare computer which is i3 3227U, kiks point out he has a gph difference on different computer. i try it out in my main rig.(2700X with 1080ti). 
nothing change. i went from 340bph to 490-500bph, from 10 death over 100 games to over 50 games run 0 deaths. double my gph...
all the issues i was having went away, like after entering a new level the bot just stand there for 10-30 secs before moving, compare to now it's instant run now. upgrade gem went from 50 secs down to 15 secs.
salvage went from 50-1:20 down to 30-40 secs. 

Joined: 04/14/2018 - 16:59
Sat, 02/23/2019 - 15:36 (Reply to #11)

I did not try a diffirent setup, so I can not from experience say what might be better. Our slightly diffirent setups might even be equivelant, each having their own benefits.
I can only inform that I don't feel a need for reapers, nor do I think they would benefit me.
How effective is krelms? I mean it has a 5second downtime every time you are hit, and as a melee class the crusader takes quite a few hits.

For reference, at para 24xx running tier 94 I got 567b/h in a 10h run, with this setup. https://www.d3planner.com/830784582
I got a few upgrades, now para28xx running tier 97. Lastest 1r2gr 10h run showed 700b/h https://www.d3planner.com/980601471

Joined: 01/17/2016 - 11:54
Sat, 02/23/2019 - 16:58

copy kiks's setup, nice, doing even better.
although the andariel's visage, do increase my fire damage, but also cause me to trade asi for vit and taking more fire damage.swamp pants do the same but instead increase my damage intake it give extra toughness., i am doing 94 around 12gph and 609 bph. 
just doing that simple switch not only increase my toughness from 130 to 200 also increase my gph to 12 [email protected] instead of [email protected]

Joined: 07/21/2014 - 23:28
Sun, 04/28/2019 - 12:16

Which script you using for this LON Build, can't find it.. 

Joined: 07/09/2015 - 18:42
Sun, 04/28/2019 - 13:55